Banner

 

CNC DIY Build: Design | Electronics | Gantry | Assembly | Z-Axis | Spindle | Software

Building the Gantry

Putting together the gantry for my CNC mill. The key here is that the gantry must be square which in this case I checked by carefully measuring that the diagonals are the same length. The sides of the gantry being aluminium box section are not super-rigid but I think they will be strong enough for the materials I would like to machine.

Gantry Build 1

 

Gantry Build 2

 

Gantry Build 3

 

Gantry Build 4

 

Gantry Build 5

 

Return to home page.